Jump to content
Sign in to follow this  

Need Settings For '05 Crf250x Please!

Recommended Posts

I live in Missouri, which I don't think is much above sea level. I have cut the pink wire, cut out the top of the airbox, removed the air filter screen (should I have done this? Any benefit?), and have a rekluse auto clutch (if that makes any difference). I just bought the JD jetting kit. I checked the threads and guys are all over the place on settings. I don't want to do this twice. I already put the red needle in with the clip in the 5th position. Which pilot and main should I use and should I change the leak jet?

JIM

Share this post


Link to post
Share on other sites

The stock #40 pilot jet will have the fuel screw turned out to near 2 1/2 turns. You may want a #42PJ if you want the fuel screw closer to 1 1/2 - 2 turns.

A #160 main jet should be a very good setting with the modifications you have made.

The leak jet is optional and not as noticeable as the other changes.

Thanks,

James

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×