Jump to content
Sign in to follow this  

exhaust gasket

Recommended Posts

I wouldn't do it. What if you burn up the valves in the process. Maybe use some asbestos gasket material cut to size until you can get the gasket.

Share this post


Link to post
Share on other sites

I think I saw FFR suggest a peice of solid copper wire in some thread quite a while ago. Something about the stockers squishing out into the port.

I know you can anneal aluminum with a low temp flame to make it softer. You might do some research and see if it works for copper. Might make it easier to get a good fit.

Share this post


Link to post
Share on other sites

i found a shop that matched one up this morning,it still has a slight leak but it will be enough to breakin the new topend and get it all checked to make sure all my clearances are good.honda gasket will be here in time to hit the track :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×