Jump to content
Sign in to follow this  

wr to yz cam timing - Jetting issues?

Recommended Posts

I posted this in the jetting forum but did not get a response...

This weekend I'm planning to switch my exaust cam from wr to yz timing (2002 wr250f) I have installed the JD jetting kit as per excellent instructions. Riding at sea level to ~2000 feet and cold, the current settings are:

BLUE needle 5th clip

#185 main

Fuel screw 2 turns out.

the rest is stock

Its running great, with only a tiny off idle bog. BK mod and AP pump timing to follow.

I'm just wondering if anyone has had to re-jet after making this change?

Share this post


Link to post
Share on other sites

dont know about the cam change jetting, i would think there would be jetting changes, by the way. i have the same bike same basic mods, but no bog! i do have a zip ty fuelscrew and that helps a ton. good luck on your cams . :)

Share this post


Link to post
Share on other sites

The answer is self evendent. Look at the stock jetting for a YZ vs a WR. There is a difference in jetting so if you swap out for e cam I would expect a jetting change would be in order.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×