10 Edelbrock XR650R QS carbs left on ebay for $375 - BUY IT NOW!!!
What is the proper torque for these bolts?
Should I find stronger bolts? I would still stick to the proper torque, but feel as if these things are butter.
Prior to reassembling the case, I tested the shifting and it seems the center fork attached to the shaft seems to stick at the steepest section of the drum. I have cleaned and tested all forks and surfaces for smooth movement, tried it with silicone and oil. With very little help, it seems to shift ok, but without the help, it binds.
Can I assume that once it is together the oil lines are attached and oil is added to the case, the binding will stop? I have tested every scenario short of assembling the entire motor.
Should I be able to successfully test the shifting with the case apart?
By Charles Mrizek
This replaces the tube that connects the two carbs on a 1987 Honda XR600R (it may fit other years).
Made in the USA.
Constructed of TPU (solvent safe plastic.)
Its durable stiff abrasion resistant yet flexible enough you never have to worry about breaking it when you're taking apart your carbs.
Fits the o-ring perfectly and slips into the carb nice and tight.
Matches the rear shock coil.
If you would like to buy one contact me via e-mail. They cost $20 Shipping is free (anywhere in the USA). $10 off for active duty or retired military.
Make your subject: XR600r