Best Prices on Exhaust?

Who has the best deals on exhaust? Yosh or Muzzy supplier?

Internet sites etc?

TT of course! Shop around then get them to price match.

The muzzy is a little less money than the yosh, not sure how much but I haven't heard of any yosh's going for under $400 with the tec inserts and you can get the muzzy with the spark arrestor/quiet core kit for under easily. Unfortunately last I heard TT doesn't sell the muzzy, when I bought mine muzzy advertised on this site but I still couldn't buy one here.

Check for yosh price then TTstore will match it. I got the Yosh SS full system for $386 that way, the tec insert was another $15-18 I think.

I was just browsing ebay and saw a dealer elling the Yosh Stainless R3 for about 4 hundy... Is this system loud without an insert, and is aninsert available? Also, is there a difference between an S and E exhaust? I definietly want a new exhaust this year, stainless is good enough, I want power but also something that can be made quiet for dualsporting. Is the Yosh R3 heading in the right direction :)

i can't see a tech insert being needed..... there is no possible way that a 400cc motorcycle with a yosh on would be louder than a harley or a titan or something like that.

For the is no big deal. It is for the dual sport rides where you have to pass a sound check during a tec inspection where quiet might be required.

My Big Gun Race is as loud as they come. Nobody has ever complained to me about it...not on the street. I have not ridden on a dual sport ride that has done sound testing yet either.

i always wondered the same thing about db levels on the yosh pipe. bought it anyway, and it is loud. sets off car alarms ! :) have pulled up at friends houses and they would already be coming out to see who pulled up on a harley!no lie. well, last november i entered that g.p. in gorman and i had to pass a sound ck......that thing was bouncing from 99 d.b's to 105 !!!!

good thing i brought my bad ass steel stocker! :D anyway, i absolutly love the full system, especially w/ all the other mods.just got the tec insert last sat. and tried the med.......i guess its a little bit more quite? :)

it mosdef sounds wierd. not goin to try the small, i sence battling that carb. :D again to re-jet! :p

do you have a picture of your bike with the muzzy on it, if so can you put a picture on so i can see it. i see where you said you can get a muzzy for well under $400 i looked at the muzzy web site and it was $427 pluss $30 for the quiet insert and spark arrestor, where did you get yours.

thanks, mike :)

Here are a set of pics of the muzzy, comparing it to stock and then on the bike.

Pm me for the place I found to be the cheapest. I don't link to non-TT retail sites here, just not right to do.

That is excellent. The difference is very obvious. And on top of that you had the e exhaust. The difference over the S pipe is even more dramatic.

We need to show this to every individual who seeks to cut corners and go cheap on thier exhaust. Say no to slip ons!

TT Store just did a price match on an FMF header for me. No Questions asked!!! :):):p Shop there help keep this site FREE!

That is excellent. The difference is very obvious. And on top of that you had the e exhaust. The difference over the S pipe is even more dramatic.

We need to show this to every individual who seeks to cut corners and go cheap on thier exhaust. Say no to slip ons!

Feel free to link to this group of pics, I don't plan on moving/removing them. There is also an old post where I measured it at specific locations and burned did the same on a yosh ss.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Bgringo
      I've read a lot of threads about this but still haven't found exactly what I'm looking for.  I'm pulling my 2004 DRZ400S out of storage sometime this week and getting it ready for the season.  I live at 9,000 ft, but my first ride of the year is probably going to be at around 5,000 ft.  I was going to pull the 145 main jet I'm running and put in the 150 adjusting the needle from the 2 clip to the 3rd, then re-jet once I got home.  I already have the extended fuel mixture screw in place so I started thinking that I should just run the 150 jet set up and adjust the fuel screw to compensate for the higher elevation where I'll be doing most of my riding.  I will be going down in elevation for rides until late May or June depending on snowfall, but riding on the street when I'm able.  Are there any disadvantages with this?
      I'm new to posting on this forum, so please forgive me if I didn't get the right search words in and there is already a post about this.
    • By Markl5557
      I am currently running 10w 40 Belray non synthetic and I want to switch to full synthetic amsoil .... is it ok to switch from regular to synthetic? I have read it’s not safe to go from synthetic to regular can someone explain if it’s safe to go from regular to synthetic!? Thanks !
    • By RockyMtnMark
      Good Morning,
        Last night I measured my valve clearances for the very first time (I know...) on my DRZ400S.  It's a 2002 and I've owned is since 2011.  I bought it with t's got about 15,000 miles on it and most of it's miles these days are on dirt.
      Intake specs are 0.10-0.20 mm.  Exhaust specs are 0.20-0.30
      My intake valve clearances are in spec, forgot to write them down.  My exhaust valve clearances are between 0.1778 and 0.2032 which is slightly out of spec.  They are no more than 25 microns out of spec.  My question is, do I really need to shim these?  Will this kind of out-of-spec cause performance, mechanical, or other losses?  As far as I can tell, I'd have to buy a whole shim kit which is like $80.  Thanks!
    • By Zach440
      Selling my 2009 Drz400sm. Been a great bike but it’s time to let go . Not looking for any trades - spring is just around the corner ! Located in northern Virginia . Cash only $4200- willing to negotiate I have some wolfman luggage options available as well. Love to make a package deal for someone 

      -11640 miles . Mild off-road never wrecked.
      -Oil / filter changed every 1500 miles
      -New did chain , brake pads , front sprocket at 10400 miles .
      - valves checked and within spec at 10,000
      - jetted with JD kit and 3x3 mod
      -doubletake mirrors
      -waterproof usb wired and located next to Speedo
      - drc large foot pegs , barkbusters with integrated turn signals . 12oclocklabs tall delete with upgraded circuit board
      -thumpertalk case savers
      -sergeant seat (amazing) and Clarke 3.9 tank (190mile range )
      - fog lights wired in so they shut off with high beams
      -Shorai lithium battery
      -led headlight

      - stock gas tank and seat will be included

      The bike is dirty in photos and I apologize my water is currently disabled outside due to freezing temps . Radiator guards and skid plate NOT included but can be for some extra $$. Rear tire could be replaced but front is fine .
    • By tplayer100
      Currently have a 2000 drz400s work stock suspension. From my understanding this is the worst suspension the drz ever came with without even rebound damping adjustment. Therefore I'm looking for a upgrade. I'm seeing three approaches to take. First being a newer year s model suspension with dampening adjustment. A SM model USD forks and triple tree or some USD forks and triple tree from a rmz. So if you were going to upgrade what direction would you go. I currently ride off-road mostly but I do have some 17s for on road with as well so have to keep that in mind. Thanks