Jump to content
Sign in to follow this  

Stop screwed

Recommended Posts

Ordered the YZ stop screw, got it, and it seemed kind of long. Took out the shortened screw, which measured approx 23mm, which I believe is the correct length. Measured the new screw, which is part # 5GS-14591-00, and its approx 1-1/4 " long. I believe that is the original length of the stock screw. I let the parts fool find the #, it was off the # I got here @ TT, and it cant be right. Moral of the story: NEVER LET SOME FOOL TELL YOU WHAT PART TO ORDER!

Share this post


Link to post
Share on other sites

Why order the throttle stop screw if you had a WR screw shortened to the correct length of 23mm ? Redundant, since they both accomplish the same task ? :)

------------------

Y2K WR400FM,Answer top tree w/Accu-Trax clamp,Pro-Tapers(CR-Hi w/ EE handguards),Devol Rad. & frame guards, Guts tall soft foam w/ ballistic cover, 13/50 gears w/DID VM X-Ring, Kouba-T,Michelin M-12's ft.& rr.,12 oz. flywheel weight, Ty Davis Link & Shark Fin, Cycra front rotor guard and T.M. Designworks Chain guide and buffer

Share this post


Link to post
Share on other sites

Bluethunder-

I wanted to be sure about the correct length. Some guys cut it down to 27mm, others to 22mm. I heard too many different opinions, so thats why I blew the 13 bucks trying to get the right length. Im currently using a screw thats 22mm long, and I dont hear the WFO babbling, so I think Im cured.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×