Pagoda's Points Race

Pagoda's practice day/race day this weekend was awesome.The weather was perfect and the track stayed in great shape throughout the whole weekend.The turn out was huge too...2 groups of 125B and 3 groups of 125C. As always, the track crew was prime and there were some awesome flaggers out there ( :naughty: ) too. Sorry to anybody who missed it...

Missed it here.Went to start the 250f to warm it up to change the oil and had a nasty ticking sound.Worked until 11:30 to try to figure it out but couldnt find it.O well.Bikes in the shop and will make sure to be at the next Pagoda race!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Steph7
      Howdy! I'm looking for early season riding within driving distance. Ontario is still 4-6 weeks from riding and I'm itching....
      Advanced single trail rider, open to medium+ difficulty 4x4 / ATV trails, doesn't have to be single trail only.
      I'm an hour from the border, Ottawa, and good to drive 7-8 hours max to get a day or 2 of riding far as Cleveland, Pittsburgh, Philadelphia, up the coast to Maine
      I've found the following locations so far that might fit the bill: RAC/FRO - 175$ yearly pass only - daily pass coming in May AOAA - similar to RAC/FRO - good option!
      Any on this list you would remove?
      Did I miss any?
      Any insight would be greatly appreciated!
    • By woodsrider4
      Has anyone around New Jersey heard of Lepis Land? I found people talking on other forums about it and how riding there is by donation only. Does anyone have anymore information about it or a phone number to contact them?
    • By Agitator
      10/17/08 UPDATE! I posted more photos on page 2. Not all pictures are on page 1. I will constantly be adding more photos as I go along.
      Many of you have heard of my starting/idle problems with the 610. Carburetion has been ruled-out time and time again. I sensed something else was going on. The engine has never wanted to idle down, sounded like there was a load on it even in neutral. Since I had metal filings in my oil when I first got it, I have now decided to overhaul it and make everything ship-shape. It turns out that I was correct- there is some valve damage that I will talk about later.
      I don't like to take apart dirty engines and get the dirt inside 'em

      A little gross.

      My cleaning station:

      A little better now

      Clutch removal:

      after removing springs

      bottom of pressure plate

      everything looked decent as far as wear

      after removing plates

      basket after removing hub

      Area after removing basket.

      Removing the starter gear with snap ring pliers

      More to come. I'm uploading pictures of the case splitting, etc...
      I'll try to ease off on the photo-over-obsession. The next batch of info/photos will be a little more interesting.
      Comments and suggestions are appreciated. I'm already ordering parts from George so before I know it, I'll be just waiting on new parts (after a little more cleaning.