Which of these bikes is your primary ride?   3,801 members have voted

  1. 1. Which of these bikes is your primary ride?

    • XR650R
      958
    • XR650L
      1629
    • XR600R
      811
    • XL600
      188
    • Other XL/XR
      162

Please sign in or register to vote in this poll.

4,410 posts in this topic

IMMX Skid plate added. I ordered it "Honda Racing Red"...BIG MISTAKE! The color was awful, so I found this guy locally who stripped it and then powder coated (for $20) it to match the front fender. PERFECTION! I love the skid plate now.

IMG_0122.JPG

Edited by Tram@RN
1 person likes this

Share this post


Link to post
Share on other sites

bth_IMG_0824_zps2c0e422f.jpg?t=137866693

 

It actually looks like Ive done some work on the old girl....prep...prep...prep..and more prep.Its worth it in the end. Hopefully it should really start moving along now as the motor is now complete and just needs a fresh paint then fit. While Im here do any of you guys know of any other rebuilds for the 85 xr 600 whether on this site or somewhere else. I would appreciate it if I could find some good reference material. Cheers guys....

Edited by kjh1965
1 person likes this

Share this post


Link to post
Share on other sites

Here's my 97' XR650l, CRF fender conversion done in the rear and front so far really.

1378699841668.jpg

1 person likes this

Share this post


Link to post
Share on other sites

Here's my 97' XR650l, CRF fender conversion done in the rear and front so far really.

Lose the tank shrouds next! Eyesores!

Share this post


Link to post
Share on other sites

2001 XRR. All decked out. New front fender is being shipped. I just finished making a sweet fender brace this afternoon. Dirt tires in the garage for this weekend!

To do: pumper carb, new sticker kit

1378775758231.jpg

1378775779673.jpg

Edited by thehoggster

Share this post


Link to post
Share on other sites

Lose the tank shrouds next! Eyesores!

Yea I want to get a different tank anyways. Few more pics.

1378911900801.jpg

1378911917718.jpg

1378911928861.jpg

1 person likes this

Share this post


Link to post
Share on other sites

My 02's. My XRR has suspension work, uncorked and after my brother managed to blow it up built to the moon. My  XRL is bone stock other then a pipe, uni filter and bars. 

20130909_164509.jpg

20130909_175017.jpg

Share this post


Link to post
Share on other sites

my XRR.  mikuni flatslide, full XRs only, clarke tank, scotts steering stablizer, powdercoated hubs, etc etc just to name a few things :ride: 

 

555346_10200097337951320_779829096_n.jpg

1 person likes this

Share this post


Link to post
Share on other sites

my XRR. mikuni flatslide, full XRs only, clarke tank, scotts steering stablizer, powdercoated hubs, etc etc just to name a few things :ride:

Posted Image

Very nice

Share this post


Link to post
Share on other sites

th_IMG_08291_zpsd814119b.jpg

 

Still don't know how to get these pics enlarged...anyway its taking a bit of shape now...25/12/13 deadline......Maybe.

Edited by kjh1965

Share this post


Link to post
Share on other sites

Sold my YZ426 and bought a plated 2001 XR650R. First ever BRP for me. Picked it up this past Saturday. It's uncorked with an FMF pipe. The rest is pretty much stock except for bars. Can't wait to do some local dual sporting in and around Orange County.

 

 

 

 

XR.jpg

Edited by spdnjoe
1 person likes this

Share this post


Link to post
Share on other sites

ms piggy in her natural habitat recently  - on top of a sand dune in the simpson desert...good piggy, 3 deserts, 4,000klms (2,500 miles) in 8 days along with a few mates and a 4WD full of beer and camping crap....no showers, no email, no ladies...lovely!

 

IMGP0681_zps0342e9e9.jpg

3 people like this

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


  • Similar Content

    • By James Quintin Lattea
      Hey Guys and gals,
      I am having an issue setting up my lights and I am not sure what I'm missing. I have a 2001 Honda XR650R that was "made" street legal by the previous owner. I'm trying to add in front blinkers and when I hook up my front blinkers all the lights dim and  the front don't flash or even power up. I am lost as to what I am doing wrong or if the battery pack I'm using does not produce enough amps to run the system. I will link the parts I'm using below and a diagram of how I'm attempting to wire it. Any Ideas or help would be much appreciated. Not sure on the Amp draw or limit on the items been digging just no luck as to what is being used or produced as of yet (blew my amp fuse in my meter being a dummy). 

      http://a.co/7MFeePA Hand Switch
      http://a.co/9F5rcRT The Front Blinkers (shown to use 5.4w on 12v so I think about .5A)
      http://a.co/gQ1OTf7 Brake and blinker combo (25w so about 2.1A)
      http://a.co/2JRKUTj Horn (shown to use 1.5A)
      http://a.co/1i6wwGk Battery it produces 12v 15A output
      http://a.co/8Z1Z8iv How I get the power off battery cut in half and bullet crimped
      http://a.co/aXkrtgB Flasher relay (max 42W adjustable to .02A to 12A)
      http://a.co/8Z07FbJ Other flasher relay thinking other was the issue not the case
      Thanks,
      J
    • By Christian Klopfer
      So I recently bought an 85 XR600R. My 1st bike when I was 13 was a 79 XR 250 and loved it. Now I bought the best bike from a young kid who said it was running in his ad. Of course it wasn't when I went to look at it. But, the price was right after I talked him down a little. My son and I have replaced the CDI, plug, and coil pack ensuring it had a good spark. We cleaned the carb, adjusted floats (it's the duel carb set up) and discovered that the mixture screw was missing, which we replaced. My son managed to get it started a few times by relentlessly kicking it over because he's 15. Haha. It idled unpredictably and cut out mostly within a minute not to be started again until it cooled. It ran long enough once for me to ride it up and down the road a few times backfiring with almost every gear shift for about ten minutes tops. It seemed underpowered but was still able to lift the front wheel off the ground slightly during takeoff. Now I didn't tell you that I had bought a compression gage and checked it prior to all this. It was roughly 70psi which I was told by a coworker was plenty to get it started and ride on. With all the difficulty starting it I decided to check the Haynes Manuel that I have and check the actual compression spec which I should have done from the beginning. Now that I realize I'm at/under 1/2psi compression I'm doing a little research as to what to do now. I'm not a mechanic, but I've gotten my hands in there doing simple repairs and whatnot. If I have a manual I'm pretty much good to go, but a full motor rebuild is a little daunting. I have a good friend that is an auto mechanic that lives right down the street that just started getting into restoring bikes that is willing to help me out. My biggest concern is the availability of parts for this motor. I've seen some stuff here and there on the web, but I'm looking for any suggestions that can point me in the right direction. I Really LOVE this bike and would love to see it ressurected, but I'm afraid I'm going to get too deep in to my pocket to have it make sense. Any info or suggestions welcome!
       
    • By tilstad
      I have some new rims in sizes 18x2.15 and 21x1.6. This would be inside measurements, flange to flange. 32 spoke holes in both.
       
      They are new, in chrome , good for adding some bling to a modern bike, or restoring an older one.
       
      I listed them on ebay.
      https://m.ebay.com/itm/2-15x18-32-Hole-Chrome-rim-Honda-CRF-others-Japan-made-/272882727078
      https://m.ebay.com/itm/1-65x21-rim-chrome-Honda-CRF-others32-hole-/272882728633
       
      If you have any questions or concerns, let me know.
       
       
       
    • By volumebikertom
      Hello, I recently purchased a used 2003 XR650L. The bike is giving me a weird problem. It has a misfire under load. In any gear, if I am at about 60% throttle, is bucks and misfires, and has no power. It feels as if the bike is bouncing off of a rev limiter. I can eventually make my way up to 65mph if I stay in 4th gear and be easy on the throttle. 5th gear is useless, the bike will barely run in 5th gear, any sort of acceleration and the bike misfires and bucks. The bike came with a Big Gun exhaust slip on pipe, and a Uni air filter, other then that it appears stock. The male I purchased it from advised the gas in the tank was one years old gas. The first thing I did was remove and drain the tank, change the oil, and clean the air filter. The problem definetely wasn't gas related. I removed the carburetor and inspected it, it was dirty but I did not find anything major wrong with it. It looked as if someone half attempted to do Dave's mod, as the tab on the fuel mixture screw was ground off. I went ahead and completed Dave's mod while I was inside of the carb. I have no clue what size jets are in the bike. I put it back together, and the problem is still there. I ordered a new CDI box, and put that on the bike and the problem is still present. Any help would be great!
    • By Brent Wilkey
      I'm trying to find an XR650R that had already been tagged and titled. Any recommendations on where to look? I'm not having any luck so far. I live in GA and I'm definitely willing to travel pretty much anywhere east of the Mississippi (maybe farther if I have to). Any help is appreciated.