Which of these bikes is your primary ride?   3,801 members have voted

  1. 1. Which of these bikes is your primary ride?

    • XR650R
      958
    • XR650L
      1629
    • XR600R
      811
    • XL600
      188
    • Other XL/XR
      162

Please sign in or register to vote in this poll.

4,409 posts in this topic

Here's my BRP in its current setup. I have a Scott Damper on the way and some custom graphics ordered for the sides :D The XRR is one sweet ride :worthy:

reyn8.jpg

img0119ll8.jpg

img0126ft9.jpg

Hodakaguy

Share this post


Link to post
Share on other sites

here is my pig, on possibly our last trail ride this year

fall2.jpg

here she is looking sad because we are about to start our 50 mile ride home and my fingers will be frozen soon, because I just had to keep riding the trails, pushing our departure later and later.:D yeah, it was worth it!!!!

fall7.jpg

Share this post


Link to post
Share on other sites

2002 XR650R

Pro Taper contours - CR High

GPR steering damper with sub mount and triple clamp

Cycra Pro Bend hand guards

Pro Circuit T-4 Full exhaust & pipe

XR's Only case saver, mirror posts & temp dip stick

Baja Designs street kit & speedo

Upgraded thermostat & cap

Utah skid plate

Magnetic drain plug

HRC intake upgrade

Dual sport folding mirrors

Acerbis Sahara fuel tank

IMS pegs

Tusk fender pack

Jetted with a 172 main and a 68s pilot

All fluids & grease recently serviced

Plated for the streets of WA

picture001zn9.jpg

picture002pf0.jpg

I had to modify the headlight shroud so the turn signals would clear the jumbo tank when turning.

picture010pu5.jpg

picture009rt6.jpg

Share this post


Link to post
Share on other sites
Here's my piggie... loaded up and ready to go.

xr1.jpg

Sleeper, what kind of luggage setup are you sporting there? I can't quite make out the label on the back. Do you like it? Is it waterproof? I can't tell if it's all one piece. Looks like it holds a lot of capacity. Please tell when you have a chance. Thanks.

Share this post


Link to post
Share on other sites

Heres mine. Winter project top end and trans rebuild last winter. This was my first summer on a pig and loved it. Take it over an mx'er any day.

www.photobucket.com

Share this post


Link to post
Share on other sites
Heres mine. Winter project top end and trans rebuild last winter. This was my first summer on a pig and loved it. Take it over an mx'er any day.

Pigxman's bike! :lol:

www.photobucket.com

xr650r.jpg

Just hit the little mountains icon and paste you link there! :p

Share this post


Link to post
Share on other sites

Mr Intheriver that'sa nice pig indeed and has a couple of similarities to my own sow...how'd you get the inner stuff from outa the w/b pipe!? mines stuck solid..

IMGP0743.jpg

Share this post


Link to post
Share on other sites

Love the Sumo'd XRR's! :lol:

ISDEwithRobbyApril08009.jpg

One of the checkpoint guys says to me, "now that's a man's bike!"

You betcha.

Share this post


Link to post
Share on other sites

Took the BRP on a business trip to western Colorado (Grand Junction) and got a little play time in while there. I checked out the OHV off I70 (Colorado folks wil know)

WOW, this place was like 10 square miles of moto x track. Not sure if you can see (took with my cell phone) but all those hills in the picture are track/jumps/ you name it, what a blast.

The BRP did better than expected- after Daves/desnorkel/uni/rejet/14 tooth sprocket...

Next- adjust that suspension......................

1030081108a.jpg

1030081127.jpg

1030081137.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


  • Similar Content

    • By Christian Klopfer
      So I recently bought an 85 XR600R. My 1st bike when I was 13 was a 79 XR 250 and loved it. Now I bought the best bike from a young kid who said it was running in his ad. Of course it wasn't when I went to look at it. But, the price was right after I talked him down a little. My son and I have replaced the CDI, plug, and coil pack ensuring it had a good spark. We cleaned the carb, adjusted floats (it's the duel carb set up) and discovered that the mixture screw was missing, which we replaced. My son managed to get it started a few times by relentlessly kicking it over because he's 15. Haha. It idled unpredictably and cut out mostly within a minute not to be started again until it cooled. It ran long enough once for me to ride it up and down the road a few times backfiring with almost every gear shift for about ten minutes tops. It seemed underpowered but was still able to lift the front wheel off the ground slightly during takeoff. Now I didn't tell you that I had bought a compression gage and checked it prior to all this. It was roughly 70psi which I was told by a coworker was plenty to get it started and ride on. With all the difficulty starting it I decided to check the Haynes Manuel that I have and check the actual compression spec which I should have done from the beginning. Now that I realize I'm at/under 1/2psi compression I'm doing a little research as to what to do now. I'm not a mechanic, but I've gotten my hands in there doing simple repairs and whatnot. If I have a manual I'm pretty much good to go, but a full motor rebuild is a little daunting. I have a good friend that is an auto mechanic that lives right down the street that just started getting into restoring bikes that is willing to help me out. My biggest concern is the availability of parts for this motor. I've seen some stuff here and there on the web, but I'm looking for any suggestions that can point me in the right direction. I Really LOVE this bike and would love to see it ressurected, but I'm afraid I'm going to get too deep in to my pocket to have it make sense. Any info or suggestions welcome!
       
    • By tilstad
      I have some new rims in sizes 18x2.15 and 21x1.6. This would be inside measurements, flange to flange. 32 spoke holes in both.
       
      They are new, in chrome , good for adding some bling to a modern bike, or restoring an older one.
       
      I listed them on ebay.
      https://m.ebay.com/itm/2-15x18-32-Hole-Chrome-rim-Honda-CRF-others-Japan-made-/272882727078
      https://m.ebay.com/itm/1-65x21-rim-chrome-Honda-CRF-others32-hole-/272882728633
       
      If you have any questions or concerns, let me know.
       
       
       
    • By volumebikertom
      Hello, I recently purchased a used 2003 XR650L. The bike is giving me a weird problem. It has a misfire under load. In any gear, if I am at about 60% throttle, is bucks and misfires, and has no power. It feels as if the bike is bouncing off of a rev limiter. I can eventually make my way up to 65mph if I stay in 4th gear and be easy on the throttle. 5th gear is useless, the bike will barely run in 5th gear, any sort of acceleration and the bike misfires and bucks. The bike came with a Big Gun exhaust slip on pipe, and a Uni air filter, other then that it appears stock. The male I purchased it from advised the gas in the tank was one years old gas. The first thing I did was remove and drain the tank, change the oil, and clean the air filter. The problem definetely wasn't gas related. I removed the carburetor and inspected it, it was dirty but I did not find anything major wrong with it. It looked as if someone half attempted to do Dave's mod, as the tab on the fuel mixture screw was ground off. I went ahead and completed Dave's mod while I was inside of the carb. I have no clue what size jets are in the bike. I put it back together, and the problem is still there. I ordered a new CDI box, and put that on the bike and the problem is still present. Any help would be great!
    • By Brent Wilkey
      I'm trying to find an XR650R that had already been tagged and titled. Any recommendations on where to look? I'm not having any luck so far. I live in GA and I'm definitely willing to travel pretty much anywhere east of the Mississippi (maybe farther if I have to). Any help is appreciated. 
    • By kwekuPaul
      Hi all,
       
      Any idea where i can get an upper chain slider for XR650R (Not the roller, the little rubber slider) mine has completely rotted away.
      Have ordered lower chain slider of ebay but cant find upper one for life of me.