should I change my tripple clamps bars.. fill cramped when I ride..

Hey Fred! You have a couple options. One there are a few companies that make risers that will fit into the stock top clamp. You also have the option to go to Pro Taper bars and buying the adapter that fits into the stock clamps, it raises the bar position about 3/4 inch. Beyond that yes you would want to go with aftermarket clamps. SCOTTS makes some excellent products you may want to give them a call and explain your situation. Keep in mind which type of bars you want to run you want to be sure that what ever you end up with will fit your bars.


JJ from WA - 99 WR; WR timed, EKN Needle, Scotts stabalizer, Scotts triple clamps, Pro-Tapers, Michelin S-12's, Terry Cable hot start, MSR Raptor clutch lever, Moose skid plate, Works frame guards, Acerbis Pro Rally guards, Renthal MD-soft grips, Factory Effex graphics, YZ IMS seat base, YZ Factory Effex seat foam and gripper seat cover, YZ rear fender

do a search on my name & you will find plenty of info


Thumper racing has bar risors that are one inch or 1.5 inches. Also use cr high bend handle bars it gives you a bunch of room. I am 6'2 and don't know what I would do without them.


I am 6'8' tall.

When people complain about bikes being too tall I f'in laugh....

On my 01 wr 426 I put a Ty Davis tank, IMS seat base w/thumper +1"foam and a thumper seat cover, Protaper t-clamp w/renthal Carmicheal bend bars.

Now I feel like I have room to breathe.

It is expensive to change everything but it is worth the increased comfort factor....


$89 1.5" riser from Thumper racing, it bolts onto the stock triple clamp, throw away the stock bars. I go with the Renthal Jimmy Button Bend and find it excellent, cheapest way to go for max comfort. I just put on the IMS tank and seat with tall seat foam but havent ridden it with this seat tank combo yet. The bar deal went on within 3 weeks of getting the bike, I highly reccomend it.

6'3" 200lbs.

YZ seat and tank with extra tall seat foam from Baja Designs. White Brothers triple clamp (this moves the bars up to 28mm forward). This has helped me alot.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now