Jump to content
Sign in to follow this  

262f jetting (blue needle position) jd

Recommended Posts

hey jd

i have a 262 hi compression piston in my bike-- our altitude is 2200 ft above sea level-- i have a 180 main jet and have the clip in the top groove on your blue needle jet---when i run the bike at 1/3 to 1/2 throttle it runs the best at these settings-- when i have the needlle raised at the 3rd groove it seems to run rich-- if you are going down the road cruising the bike would sputter and not run very clean-- do you have any ideas? thanks ray

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

  • Create New...