Jump to content
Sign in to follow this  

Jet Needle Spacer (washer)

Recommended Posts

Anybody have a picture of what this mod looks like?

Thanks in advance

Share this post


Link to post
Share on other sites

sorry no picture but it's a about a 5/16" diameter aluminum or stainless steel washer that is .030" thick. the inside hole is big enough for the needle to fit in. should be able to pick one up at a hardware store. just pull under the exsisting snap ring. it helps eliminate the stalling on sudden throttle off and makes for stronger mid-range. the lean idle can be improved by drilling out the brass plug under the carb and turning the idle screw out about 2 1/4 turns +/- 1/4 turn. smoothed my 2000 right out. to improve the top end you'll have to rejet and open up the aribox.

bol.

steve

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...