JKrajovan Posted July 25, 2005 I need to take the flywheel off of a 1983 XR80. Does anyone know the size or dimensions for the exact flywheel puller? Need to get inside and check a couple of things Thanx...JK Share this post Link to post Share on other sites
KYCONNELLY Posted July 25, 2005 hey they make a special tool for removing the flywheel, If you use a jaw puller it will tweak the flywheel I've done it myself a month ago. Go to ebay and type in flywheel tool their on their for like 15.00 bucks. also some parts stores like oriley or napa sell them for 25.00. you'll need a impact wrench also. Share this post Link to post Share on other sites
TrikeKid Posted July 25, 2005 here ya go http://www.denniskirk.com/jsp/product_catalog/MMYSkuDisplay.jsp;jsessionid=YV4MB2MAAYURTLA0WTISM4VMDK0NCIV0?leafCatId=11903&catId=119&store=Main&mmyId=7566 Share this post Link to post Share on other sites
JKrajovan Posted July 27, 2005 If anybody is interested...I didn't need a flywheel puller after all. I had two crescent moon shapes where I could fit in a "points file." I filed down the points and she started. Then I ran into carb problems, but she started. Thanx for your input and help. Now, the problem lies in fixing or cleaning the choke on the carb. Any help, I'll take it...JK Share this post Link to post Share on other sites