I gave my bike a huge cleaning today. It took about 2 hours. I pressurewashed it, took all the plastic off, pressurewashed the bike naked, pressurewashed the plastic, then hand washed the plastic. Pictures! Yes I know, I really really need a bike stand. No Plastic Left Side No Plastic Right Side No Plastic Rear No Plastic Front Clean Plastic Assembly 1 Assembly 2 Assembly 3 Assembly 4 Assembly 5 Assembly 6 Finished Right Finished Left Finished Front Left Finished Front Right Finished Rear Right Finished Rear Left New Rear Tire Carlsbad K772 Trail Tech Speedometer Trail Tech Speedometer Setup Story behind this is the dealer didn't have the one specifically for the 230 and I didn't want to wait for one to come in so I took a CRF250 one and fabricated up this piece so it would fit on. It works good! Bent Clutch Lever I was at the gravel pit a two weeks ago. I got off my bike and the kickstand sunk in the soft sand and the bike fell over. The grip went into the sand and the lever hit a rock. First time doing this photobucket thing. Anyone know a good aftermarket clutch lever that has that switch?