Jump to content
Sign in to follow this  

What size is the........

Recommended Posts

what size is the nut that holds the triple clamp assembly together? I'm installing the Scotts damper and I need to get that sucker off to do some grinding. Thanks.

Chris

Share this post


Link to post
Share on other sites

30mm is the correct size socket for my 99.

Just took mine apart and back together and it is still 30mm socket after looking for a second and third time.

------------------

99 WR400

BRC

NOHVA

AMA

[This message has been edited by TW (edited 12-26-2000).]

Share this post


Link to post
Share on other sites

I was thinking 32.

Looks like we have at least narrowed it down.

------------------

Darin from Missouri 1999 WR400F

[This message has been edited by milkman2544 (edited 12-26-2000).]

Share this post


Link to post
Share on other sites

BTW, I have a '00 if it makes any difference. Thanks.

Chris

Originally posted by Jeff in AZ:

If memory serves correct, you'll need a 32mm socket for that nut.

Share this post


Link to post
Share on other sites

Hey C2, Erik here, how's the damper working out? I hadn't heard from you and I hope all is well. Good luck on the install! Should be an easy one. Erik

------------------

So Cal Erik

Visit my club's site at <A HREF="http://www.ruts.org

" TARGET=_blank>www.ruts.org

</A>

Share this post


Link to post
Share on other sites

Hey Erik,

I have not been able to mess with the dampner yet. Between xmas, 9 week old daughter, work, freezing temps and snow, plus a few logisticals (need to borrow BIG metric socket which I'm not sure what size yet, drill stripped out bolts from the renthals to bend the crossbar, then grind the excess metal off the triple clamp....) well I havent't had alot of motorcycle time. But I'm slowly but surely getting there. Thanks for asking.

Chris

Originally posted by So Cal Erik:

Hey C2, Erik here, how's the damper working out? I hadn't heard from you and I hope all is well. Good luck on the install! Should be an easy one. Erik

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×