400SX 2000 For Sale

2000 400SX for sale. Extremely well kept, with p-38,WER skidplate, PC-t4 exhaust, and stock exhaust too. The list of add-ons is minimal, as these

bikes don't need many to begin with!. It does have the suspension completely dialed in, with all the works goodies inside. Make me a reasonable offer, and it's yours.



So Cal Erik

Visit my club's site at <A HREF="http://www.ruts.org

" TARGET=_blank>www.ruts.org


Mike, I have another 400sx, and don't have room for two. I certainly wouldn't even think about changing to another color, as I'm totally satisfied with the RFS's. We definitely need to go riding sometime soon, preferably after some rain. I heard from some guys from RUTS, that it was VERY dusty at Forest Hill last week. October or November sounds like a good time to go up North. Let me know if any rides are going on then.

I hope all is well with you. Erik


So Cal Erik

Visit my club's site at <A HREF="http://www.ruts.org

" TARGET=_blank>www.ruts.org


What are you doing, defecting again, or a new bike on the horizon. Come on Erik, we still have to ride Stoneyford.


[This message has been edited by Mike in Roseville (edited 06-26-2001).]



I assume you're the same guy selling this bike from DRN?

Are you interested in selling me the T4 exhaust and P38?

I am not sure if I want to part out the pipe

and p-38, but I will let you know if I do.

I appreciate the offer, Thanks, Erik

No worries, I'm on the boards regulary if you want to. (though I'll more than likely be buying a pipe in the next few weeks anyway)

Best of luck with the sale.

Erik , I saw your add and was wondering if you would swap out your suspension for my stock stuff? What do you think?

Head shake Willy.

Teton, How about you just get some riding lessons!!!

You'll need all the help you can get!! You're going DOWN!!!! "THE BULLY"

Well, I'm asking 4800.00 O.B.O. Thanks, Erik

Eric, We need to talk! I was already to go buy a brand new WR250F next week but now your bike is sounding very appealing to me. e-mail me, bruces@embee.com Maybe we can hook up this weekend so I can take a look at it. Are you going to ride Kennedy Meadows next weekend with the club?



Bruce I have a guy coming over to look at the bike tonight (Fri.) but I'll let you know

what happens, and e-mail you later this evening. Erik


Let your new buyer know where he can get a 6 speed transmission.



Bruce, if big E doesnt sell his bike to the other buyer, take it !! it will be much better in the desert and on a track than that WR, also get the 6spd, E doesnt need a 6spd because he dont ride any fast than 2nd gear :)

Bob, call me in the morning before you go out of town. The guy who bought my bike's name is John. I'll give him your # if that's o.k. with you. He probably will want it. Teton, thats third gear, not second!


So Cal Erik

Visit my club's site at <A HREF="http://www.ruts.org

" TARGET=_blank>www.ruts.org


The bike is sold!!!

Do any of you ride "Honda valley" in Hesperia?

Happy trails,


Socal erik, how can I join "ruts" ? I have been looking for a good Christian riding club for a long time!

Thank you in advance,

Jordan :)

Jordan, Honda Valley hvisit as been closed to riding for about a year now. All the surrounding areas are still open to riding though. To join RUTS, click onto the RUTS website at www.ruts.org In the left hand column, click on

new members and the rest is simple. If you have any questions, e-mail me at eriksmobiledetailing@prodigy.net Lord Bless, Erik


So Cal Erik

Visit my club's site at <A HREF="http://www.ruts.org

" TARGET=_blank>www.ruts.org


Thank you :)!


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Ponch
      I have a 2007 450 EXC that I recently installed a new clutch slave cylinder on. Per the 2007 KTM service manual it clearly states that the clutch needs to be filled with hydraulic oil, which I did (magura blood). That was yesterday. I went out to double check the level today and when I removed the cover, the rubber seal was all contorted and out of shape. I then looked at the cover and it's a Brembo clutch and says "DOT 4 brake fluid only".
      I flushed the line and the master cylinder about 7 times with DOT 4 brake fluid and there was no sign of the magura blood left in the system. My question is: other than the rubber boot on the master cylinder, what damage might have been done by putting in the hydraulic oil? It was in for about 24 hours.
      Thanks in advance for any advice!
    • By pumpernickelBrad
      Hi Folks!

      Sorry if there are a bunch of threads already but I used the site's search function and didn't find anything so far...

      I just found a decent deal on a '14 350 EXC-F with 11k km (unknown hours). Has a few goodies including skid plate, hand guards and it's for sale for about $2k CAD less than a '16 with 6k km on it.
      The bike is in showroom condition (appearance) with no indication it has been offroad at all.

      What would be the gotchas that would make this deal realistic? I'm coming from a WR250R where the engine lasts forever, is 11k street kms high for these bikes? 
      Are there any big defects in the '14s that I haven't dug up yet?
      With no service records what things should be done, checked, etc?
    • By Brannnt
      I purchased an '06 525 EXC some time ago, and recently pulled the motor out of the frame to address some other issues. When I removed the clutch slave cylinder, I noticed an issue the previous owner neglected to tell me about during the purchase.
      It appears that at some point, the chain broke and damaged the engine case near the clutch slave cylinder (see pics, please). I have noticed that the clutch does not fully disengage (bike lurches a bit going into gear, neutral is hard to find... its worse when engine is cold) ... I did not notice any leaks around this area (mineral oil or engine oil) before or during disassembly. 
      The previous owner (or someone) repaired it with some sort of epoxy.
      Without doing my due diligence (checking clutch fluid level, bleeding) I hesitate to state that this is the cause of my clutch disengagement issue ... but pardon my ignorance here and help me out: How bad is this?  Am I looking at replacing my engine case here or is the previous owner's jerry rig good enough?

    • By Black Sox
      Just bought a new 2017 350 excf ,will be doing 98% off road ,ordered skid plate bark busters ,
      my ? Is what's the best easiest way to eliminate rear fender light assembly.I still would like to have a break light.
      xcf fender will fit so dealer says,under $50.00 👍But xcf brake light $125.00 .👎What's the best economical way of doing this?
    • By JNV
      Hi friends from Spain.
      Mi new KTM