Jump to content
Sign in to follow this  

Jetting 520EXC

Recommended Posts

Jetting for Death Valley to Scotty's Castle?

Have been riding in Colorado, Ouray, Silverton, Telluride with 168 main and stk needle in the top groove.

What 2001 520EXC jetting is recommended for Death Valley?

The Goose

Share this post


Link to post
Share on other sites

stock should be fine -

pos #2 on the needle

175 main

2.5 turns out on the fuel screw

------------------

TBob

"01" KTM 520 EXC

Mesa, AZ

[This message has been edited by TBob (edited October 01, 2001).]

Share this post


Link to post
Share on other sites
Originally posted by TBob:

stock should be fine -

pos #2 on the needle

175 main

2.5 turns out on the fuel screw

Thanks TBob for the info. What about the "OCEMN" needle..would that be better than the stock needle with a 175 main?

Share this post


Link to post
Share on other sites
Originally posted by The Goose:

Originally posted by TBob:

stock should be fine -

pos #2 on the needle

175 main

2.5 turns out on the fuel screw

Thanks TBob for the info. What about the "OCEMN" needle..would that be better than the stock needle with a 175 main?

If you run the OCEMN needle you'll need to lower your main to a 160 - and put your fuel screw at 1-1/4 turns out. I haven't got the main set perfect yet it's a little flat on top but you'll love the OCEMN needle if your looking for more grunt though the mid :)

------------------

TBob

"01" KTM 520 EXC

Mesa, AZ

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×