Jump to content
Sign in to follow this  

EMN for DRZ OK?

Recommended Posts

I wanted to try the EMM needle (with 38 pilot, 158 main, PAS @5/8) but Sudco doesn't have any until the end of October. They suggest EMN as the closest replacement. Will the EMN work?

Thanks,

Jeff

Share this post


Link to post
Share on other sites

yes,it will work fine.slightly leaner at small throttle openings.

what pipe and air filter?you will probably need smaller main jets.........

Share this post


Link to post
Share on other sites

Burned,

Thanks for the reply. Stock pipe, stock filter w/snorkel removed (current jetting - 45 pilot, 2.5 air screw, 160 main, stock needle + taffy mod).

..."slightly leaner at small throttle openings."

I'm trying to get rid of the "off-idle bog" and low speed stalling, so I'm not sure that I want things "leaner" off-idle - but with your encouragement, I'll give it a try!

"you will probably need smaller main jets........."

I think I've read that you recommend 150-155?? I'll try that! I sure appreciate your response!

Jeff

PS - Would EKP be a better needle choice than EMN?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×