voltron Posted October 7, 2005 what size dynojet main jet should be used with yosh slip-on. Share this post Link to post Share on other sites
voltron Posted October 7, 2005 i got one of those, sweet. Share this post Link to post Share on other sites
700AICS Posted October 7, 2005 http://drz.info/drz/dynofaq.htm Share this post Link to post Share on other sites
voltron Posted October 7, 2005 is a 142.5 dynojet main jet the same as the stock 142.5 on the bike Share this post Link to post Share on other sites
700AICS Posted October 7, 2005 yes. However, the DJ needle is smaller, so the effective size is larger........ The stated jetting is for use with the DJ needle. Share this post Link to post Share on other sites
drzrobbcanuck Posted October 8, 2005 if you don't have the dyno jet needle (all you use from the kit) but still want to do the 3x3, a good alternative (though I wasn't happy with it, because I probably didn't have my fuel screw set right) is to run a 150 main (they are "mikuni, small, round" by the way) and a 25 pilot ("mikuni, long, thin") and fuel screw at ??? no f**n idea, check the jetting page at the beginning of this forum Share this post Link to post Share on other sites
voltron Posted October 8, 2005 no i already re-jetted with stage one, but i had the dealer do it when i first got it. but i've gone through carbs since then. i think the dealer through away the stock jet. Share this post Link to post Share on other sites
