johnk408 Posted October 14, 2005 What cable you guys running with the VM26? I tried to use my current cable, but it was too short as it made the throttle stay wfo. Share this post Link to post Share on other sites
goatman Posted October 14, 2005 I had to cut away the housing on the grinder. Nick the cable and your done. Good luck. Share this post Link to post Share on other sites
markbia Posted October 14, 2005 I'm using the stock one from my 03 ktm 300exc, it threads into the housing and fits the slide great. I had it laying around because it's too short for the ktm so you have to use a cr250 cable. Share this post Link to post Share on other sites
minifig-phil Posted October 14, 2005 I'm using a CR80 throttle and cable with a home made end to the carb cap. I taped it m8 and took a screw cut the head off and drilled it down 1/2" for the cable to go into. Share this post Link to post Share on other sites
johnk408 Posted October 14, 2005 Ok, maybe I will try the ktm deal, I might even have one laying around from my Katooms. If not I can fab something or buy a ktm cable and try it. Share this post Link to post Share on other sites
tx+40 Posted October 14, 2005 Mine was about 1/4" short. I went to my local shop and had them make one for me. $12 for the whole deal. Share this post Link to post Share on other sites
