Jump to content
Sign in to follow this  

How to Clean a Carb ?

Recommended Posts

just wash it off is my guess

Ease off with all the tech talk just give it to him straight and simple :banghead::banghead:

Share this post


Link to post
Share on other sites

It is actually a great question - I wish someone had a guide to a complete carb clean/rebuild to post on here.

Here is what I do:

I remove it completely from the bike - completely disassemble it, remove all jets use carb/ contact cleaner on all internal parts - to remove any and all sludge build up or dust/dirt. On the jets I will let them sit in carb cleaner then blow them out with air -

Reassemble entirely when completely dry and clean, and reinstall it.

The manual is pretty good to follow as I take it apart and reassemble it.

Share this post


Link to post
Share on other sites

It's a good idea, while the jets are out to spray carb cleaner down each passage in the carb and then follow up with compressed air. Don't forget the air jets in the intake bell of the carb.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...