Jump to content
Sign in to follow this  

Question about JD Jet Kit for E/FRC

Recommended Posts

Got my FCR (brand new) the other day and am ordering a fuel screw and JD kit for it. Someone had posted that the kid does not come with a needle and to get one from Sudco along with a new spring. When I look at the in for in the JD kit in the TT store is does say that it comes with needles so just want to confim that is correct.

Also are there other parts that I should order from Sudco? Someone mentioned springs but I was assuming that was based on the assumption that my FCR was used.

Share this post


Link to post
Share on other sites

You are confusing the dj kit with the jd kit. Yes you want the jd kit and as bryan said for the needles.

Share this post


Link to post
Share on other sites

You may be confusing the adjustable pilot air screw (PAS) that can be purchased from SUDCO. It replaces the fixed size pilot air jet. The PAS is a screw with a needle like tip and a spring to hold the adjustment. It is often used in conjunction with a James Dean (JD Jetting) jet kit.

Share this post


Link to post
Share on other sites

Air screw: 021-230 ( description - 1014-817 A/SCRW) $5.78

Spring: 021-235 ( description-16052-KM4 SPRNG) $6.5

both parts are needed .

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...