? about white bros.extended f.s.for fcr

[ROUNDEYEHELMETHEAD]

i just got an extended fuel screw for my fcr carb. i bought a white bros.one.

due to the size of the head, it needs to be installed after the float bowl is on.

only problem is the threaded portion does not fit thru the clearance hole in the float bowl.

i guess i could drill the hole, but it seams risky. i just got this bike and would hate to f up my float bowl.

should i drill it? or is the solution the zip ty one?

got it from the tt store, so i'm kind of between a rock and a hard place.

thanks

[Wayward Son]

you have to drill out the float bowl with a 1/4" drill bit.normal.

[rockchucker22]

Or file it with a small round file.

[ROUNDEYEHELMETHEAD]

thanks for the quick reply burned.

my e is going together now. new to the fcr as you may know.

i'm going by your recommended jetting. dmn clip, 5th position.

just to be certain, plug coast enrichener correct?

thanks again

[Wayward Son]

yes,as long as you are changing to a 38 pilot jet and the matching pilot air set up.

[ROUNDEYEHELMETHEAD]

wasn't aware of that. i'll do a search later.

right now i have the 48 pilot in & c.i.connected.

i'll see how that is first as i have not even ridden this bike yet.

no problems drilling the bowl. i used a few bits,removing material slowly.

thanks again.

and thanks to tt for the quick shipping on the parts.