gonzo Posted October 23, 2005 I bought an 04 and the guy put a hotcam in it because he said this stocker had damage. I dont see any and I am actually thinking about putting the stocker back in. http://michiganmafiamx.com:8081/cam/index.html Share this post Link to post Share on other sites
honda88 Posted October 23, 2005 In a couple of pictures the lobes look scratched and pitted.But it just might be lighting.If it is smooth use it otherwise leave the hot cam in.I had a hot cam in my 04 and gets it low to mid but you loose the top.Stock is mid to top but little bottom.Where do you ride low to mid or mid to top. Share this post Link to post Share on other sites
gonzo Posted October 23, 2005 Mid to top. That's why I wanted to change it. Share this post Link to post Share on other sites
Moto_Squid Posted October 23, 2005 So you'll have a hotcam laying around pretty soon....wanna sell it Share this post Link to post Share on other sites
gonzo Posted October 23, 2005 Possibly. Let me just have someone look over the stocker and I'll let you know. I havent even broke the thing in yet. Share this post Link to post Share on other sites
levy1 Posted October 23, 2005 Is that Hot Cam stage 1 or 2. One is low to mid and stage 2 is mid to high. Share this post Link to post Share on other sites
gonzo Posted October 24, 2005 They only make a stage 1 for the 250 as far as I know. Share this post Link to post Share on other sites
levy1 Posted October 24, 2005 I dont know but every bike down to a 50 is listed on their site as Stage 1 and Stage II Share this post Link to post Share on other sites
gonzo Posted October 24, 2005 They dont even have the 250 listed on their site so I am only going by what I am told. I would rather have a stage 2 if they made it. I'd be happy to trade to someone if they have one. Share this post Link to post Share on other sites
will-burr Posted October 24, 2005 There is galling wear marks on some of the ramps. I would not use that stock cam again... Share this post Link to post Share on other sites
