Frame Measurements

[Flying WR]

I had a head-on crash with a pickup while riding my WR250F. Now the front fender rubs on the rads/frame. Does anyone have any measurements on the caster angle on this bike, or other front end measurements?

Thx

[FASTFORWARDMX716]

not too sure if I can help you out with the measurements, jsut glad to see that you are healthy and want to continue riding!

[RideRaceLive123]

Holy crap.. That must of hurt. I been hit by a car but it was only going 20 mph and flew 10 feet high,and I had to go to the stupid hospital.LOL.

This might be a stupid question but are sure the front just didn't get bent somehow? And I THINK the triple clamp offset is around 27mm, if that would help at all.

[Bkinzey]

Ouch!

What year? Somebody might be able to take some measurements for you.

[Flying WR]

2001 WR Thanks.

Thanks guys. I am doing ok. Broken knees, disloacted and broken shoulder, lost 25% of my blood volume to internal bleedings in left leg. The lifted Toyota won.

[freerider_australia]

if u have the manual i sure i have seen the specs in there i got a 03 wr here is a link to where u will find the 03 manual i suspect the spec for yours r the same http://www.thumperfaq.com/oemmanuals.htm hope u get well

[av]

The spec IS in the manual, I just saw it the other day...

[redr1boy]

I had a head-on crash with a pickup while riding my WR250F. Now the front fender rubs on the rads/frame. Does anyone have any measurements on the caster angle on this bike, or other front end measurements?

Thx

Hope this helps, this is the specs for an 03 WR. Caster angle, 27.1. Trail, 117.4 mm(4.62 in). Wheelbase 1475mm(58.1 in). Good luck with your recovery.

[Flying WR]

Awesome, thanks - just what I was looking for. I "streched" the bike with in an autobody shop last weekend. Got it ok, but now I can get it right. You wouldn't believe how strong this frame is.

Thanks again