bars on my drz 125l

[sUzUkim0t0x125]

i need to put some bars on my 03 drz 125. any suggestions?? i cant find any websites w/ bars for my bike. need some help. moose, pro taper, renthal, ect. need some websites too. ?

[norcalklx]

tag t2 works mini kit. Works great even raises up the bars alittle.

[sUzUkim0t0x125]

tag t2 works mini kit. Works great even raises up the bars alittle.

where do i get them???

[fmxerwannabe_199]

i got msr on mine i really like em they make it feel like a real bike plus they look so cool any local motorcycle shop in ur area should have a set.

[norcalklx]

any parts unlimited dealer can get them or you should be able to go directly through Tag. Or just go to the store here on TT go under Tag handle bars and look for the T2 kits and you want the mini works there are 135.95 and come in silver,black,red,and blue.

[Doctor]

I put on oversized pro tapers, CR high cut 1.5" off each end and used risers to mount to stock triple clamps, with pro-taper pad. Actually looks good. I used all old parts I had in the garage.

[rpt50]

Renthal "Kawasaki mini" (for the KX 85) are a great match. Same width, good bend, but a little taller. They are not too expensive either.

[w00ht]

I just ordered Pro taper SE's from here and they were $58.00. I put them on my son's PW80 a little bit back and they have been great. Your DRZ should be able to use any 7/8th handlebar. The hard part is determining what bend you want. I went with a bar that was a bit higher with less pull back so I'd keep my elbows up more. Just measure your stock bars according to the guidelines on pro tapers chart then figure out how much different you want. I ended up going about an inch higher with 3/4" less pull back (KX High)

[DRZSuzook]

Renthal 7/8" red/silver MC bend ?? not too wide, very comforatble to ride with.

[Gumanator125L]

I have the same bike, but i put some pazzaz fat bars on it, (you may have to buy clamp) the make the stand outhttps://www.thumpertalk.com/forum/images/icons/icon12.gif

Wink