Jump to content

Coolong Fan for 450MXC


Recommended Posts

Just ordered a cooling fan for my 450. It looks to be a plug in but the wiring harness in my 05 did not have a plug in available for this fan. I soldered and used heat shrink to finish it off.Has anyone else had this similar problem with this fan. Dealer mechanic said it was odd that the wining harness should of had this on the bike. ?

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

put one on my 05 525 exc, the plugs were there and the taps on the

radiator fit perfect with four sheet metal screws that came with the fan.

think it was under $100 (suffer from crs) took ten minutes ?

Link to comment
Share on other sites

I just wanted to report back, I received my fan kit via KTMtalk.com and it was here in a weeks time. I took me about an hour total including removing the fuel tank and right radiator to mount the fan assy. I used diaelectric grease to keep the water out of the electrical connections. I also installed a Time Bomb at the same time. Both are going to be worth their weight in gold.

Link to comment
Share on other sites

i am stumped by the (probably easy) way to find the source and part no. for

a fan kit for my '03 450mxc that i keep hearing about. would someone please point me in the right direction? thanks.

Check it out in the KTM Hardparts Catalog.

KTMTalk members can get the KTM fan kit for around $80 with their 15% discount.

Link to comment
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...