Jump to content
Sign in to follow this  

any carbon fiber pipes for the sm

Recommended Posts

Im finally getting my black drz sm this week. I plan on getting a pipe very soon. Ive been looking for a carbon fiber one but can seem to find any. Yoshimura makes some really neat carbon fiber pipes but none for the drz. :thumbsup: Does anybody have any ideas?

Share this post


Link to post
Share on other sites

current pic of my bike.the carb fiber pipes are not made for a drz.this is a hayabusa can from a 4 into 1 system.it was around $300-350 for the muffler.i use the long can to try and cut some noise and gain a 2 inch core.you can use a can from a 05 gsxr 1000 system wich is shorter.it will be way loud.

Picture042.jpg

Share this post


Link to post
Share on other sites

would it be possible to just buy a yosh cf slipon from a dirtbike and "modify" it to fit my drz?

Share this post


Link to post
Share on other sites

Eddie, do you have a P/N or Yosh only sells one Busa carbon can?I don't think I can stand the Ti can noise for another season. Offers anyone? Pm me.

Share this post


Link to post
Share on other sites

i can dig up the part number.

its the carbon can from the trs 4 into 1 system.they have stainless and ti as well.

its still loud,but a deep boom rather than a sharp crack.

Share this post


Link to post
Share on other sites

SS might be good too. BTW, I've seen carbon cans crack in half from big pulse twins. Will it live on a DRZ?

Share this post


Link to post
Share on other sites

i have a stainless one if your interested.i used it to mock up before purchasing the big dollar can.

$100 to your door.its 99.5% perfect.slight scratches.you will need to get the mounting strap.

as far as the durability of the cabr goes,its unknown on the drz.i really havnet ridden the bike much since i did it.

its just now getting decent warm in the mornings here.i leave for the shop at 6am.it can be pretty cold here for a cross town commute.

Share this post


Link to post
Share on other sites
current pic of my bike.the carb fiber pipes are not made for a drz.this is a hayabusa can from a 4 into 1 system.it was around $300-350 for the muffler.i use the long can to try and cut some noise and gain a 2 inch core.you can use a can from a 05 gsxr 1000 system wich is shorter.it will be way loud.

Picture042.jpg

Funny the 05 GSXR1000 slip on TRC was exactly what I was going to buy for its carbon silencer finish off my project. Only thing I don't like is not being able to take it apart to repack easily (rivets)..... Sounds like it will fit the bill just fine for my tastes in the noise dept. though. :thumbsup:

Share this post


Link to post
Share on other sites

I found a yosh trc cf slipon for a rmz450. Would anybody have any idea how hard it would be make it fit the drz. Would it just be a matter of fabricating a new mounting bracket? Would the pipes be the same size? Or does the rmz pipe have a bigger diameter? Sorry for all of the stupid questions.

Share this post


Link to post
Share on other sites
I found a yosh trc cf slipon for a rmz450. Would anybody have any idea how hard it would be make it fit the drz. Would it just be a matter of fabricating a new mounting bracket? Would the pipes be the same size? Or does the rmz pipe have a bigger diameter? Sorry for all of the stupid questions.
What we are talking about doing you need to do it in two steps.

First you buy a full Yoshimura exhaust. Ti or Stainless I believe either will work. Then you have to buy another pipe (slipon) just to steal the carbon silencer.

Share this post


Link to post
Share on other sites
its just now getting decent warm in the mornings here.i leave for the shop at 6am.it can be pretty cold here for a cross town commute.

Well buy a pair of long trousers :bonk::bonk:

Sorry, couldn't resist it.

Neil. :thumbsup::thumbsup::confused:

Share this post


Link to post
Share on other sites
What we are talking about doing you need to do it in two steps.

First you buy a full Yoshimura exhaust. Ti or Stainless I believe either will work. Then you have to buy another pipe (slipon) just to steal the carbon silencer.

Oh i see. That probally wouldnt be to hard. It just cost more money than i thought. I will probally just end up buy the drz e yosh trc pipe. Hopefully it will fit all right. some people say it fits right on while other say it is a PITA. Thanks for all of the input.

Share this post


Link to post
Share on other sites
Oh i see. That probally wouldnt be to hard. It just cost more money than i thought. I will probally just end up buy the drz e yosh trc pipe. Hopefully it will fit all right. some people say it fits right on while other say it is a PITA. Thanks for all of the input.
Those who say its a PITA aren't very mechanically inclined. Its not that hard. :thumbsup:

Improvise. JFGID. :thumbsup:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×