Best jetting for FCR at sea level? Some mods..

[TexasArranger]

Ok, its a 01 E model, 3x3 mod, yosh on stock header, moose airfilter. I disabled the air-cut valve, it was faulty.

So how do I jet this for optimum performance?

I searched through old threads but couldnt find anything in a situation like mine.

And, I saw something about an EMM needle, where do I get this, from Suzuki?

Thanks!

[Wayward Son]

160 main jet

200 main air jet

emn needle

clip 3

45 pilot jet and 100 pilot air jet or

38 pilot jet and 75 pilot air jet

2 turns fuel screw

sudco for the needle.

[bones454]

Model (S, E, or K):E

Main jet:160

Pilot Jet:38

pilot air jet:75

Fuel screw (turns out):1-1/2

Needle/Clip position:EMM-4th

Airbox lid (on or off)OFF

coast enricher:OFF

this is my favorite ?

been told this is good,going to give it a try everthing the same but

pj 40

paj 65

[TexasArranger]

Ok, so why the 2 differant answers? What would the differance be between the 45 and 100 and 38 and 75 setup on the pilot?

Why do one of you say EMM needle and the other EMN?

Thanks again

[Wayward Son]

look at the user titles.then decide.

i evaluated your set up (which is just like 100's of other here) and gave you a set up.

the is no difference between the 45/100 and 38/75.

the stock pilot jet is 45 so all you need is 100 pilot jet.or you can buy a 38 pilot jet and a 75 pilot air jet.