Jump to content

electrical woes


Recommended Posts

Can anyone assist ?

I cut the plug out of the loom between the rectifier regulator and coils on my drz 400, ( the three yellow wire plug ) will it mater if the leads get joined together randomly rather than as it was when plugged together. I ask this as the plug had melted previously so I hard wired it out. but the regulator has now done a bunk ( no output at the red and black leads ) and obviously a new one comes with a plug attached but i`ve not got a reference point to which lead is which, as mine has long since been discarded. All the leads seem to carry the same voltage.

All help appreciated

desmo666

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...