kx85 Newbie question

[satz]

I never worked on clutches before but as i picked up a 96 kx80 for 600$ with clutch not working i thought i could do it with the manual.

you guessed it i am stuck and need help.

I removed the crankcase cover and got the pusher and bearing out.By locking the wheels i took the 5 bolts and the plate on top of the 5 springs.

now the center bolt or nut will not budge any ideas ? .

the the shaft where the cable connects from the outside which rotates when one uses the clutch does not work now.the manual is saying if this does not happen then the clutch springs might have worn off so replace.am i close to being right>?

[yamagucci]

you need to get your hands on an impact gun ,

i got a dewalt 18 v cordless impact and i use it for everything ,

thats the only way i could ever get that nut , or the flywheel nut off.............