I recently installed a DS kit which moved the clutch perch inward about 2" or so and had the stator out. For the stator to come out the torque limiter was out also. Afterwards Im now having an impossible time getting my clutch lever back into adjustment. I cant get the bike to move while in gear...I guess I should say I cant put the bike in a gear and pull the clutch lever in and roll the bike freely. Even when I first start the bike I need to really let it warm up or knocking into first gear will stall it. Once its warm it will operate pretty normally but still not free wheel as easily as it should. Ive adjusted the crapout of the lever, taken the adjustment all the way in...all the way out....what am I missing???? Could I have gotten somthing out of whack while the torque limiter was out? This is driving me , a simple clutch adjustment!