mx fenders and number plate

[KLXj0nes]

I want to swap the headlight and the back fender with the light for mx fender and number plate because i fall often and i dont want to break them & i just dont like the look of the stock back fender and headlight. If someone could tell me which mx fender and number plate would best fit my 05klx300r.

I also wanted to know that if i take out the baffle in my exhaust and i take the airbox lid off will the bike run too lean?

I cannot get the stupid baffle out, its stuck in there dam good, so if someone could tell me a goodway to get it out i would appreciate it cuz this is my first bike and ive never done it before.

Last question haha: my bike always back fires when i slow down after i let it loose(rev the crap outa it) Is it normal or should i do something about it?

[dirtsquirt101]

sounds like you're already lean if its popping on decel.

[kargo27]

sounds like you're already lean if its popping on decel.

10-4 on that one, the pilot jet screw needs to be backed out.

[kargo27]

Maier has the rear MX fenders and are a vast improvement over the look of the stock one. http://www.maier-mfg.com/shop.cfm?action=list&page=list.cfm&criteria=701&makeid=30&modelid=313

[londog79]

check out www.chaparral-racing.com, they offer a mx rear fender (maier) for the klx. and they have different colors to choose from. i replaced my rear fender with one of these, and totally changed the look of the bike, also changed the front fender with one from a kx250f.

[kawlang4]

I have 05 klx and I put a crf250 # plate on it and looks like it was made of it. Just made a custom bracket.

[Railroad_rider]

i think the rear Maier Mx fender from chaparal is the best way to go, i have one on my bike, my radiator scoops are also from Maier. they also have an awesome waranty and will replace the part within a year if you break it