Jump to content
Sign in to follow this  

Jetting Sticky-450x

Recommended Posts

Lets compile a Jetting reference for our bike;

Altitude

Main

Needle /clip position

Pilot

Fuel screw (turns out)

Leak jet

carb mods

air box mods

air filter

Pipe/ mods

Engine Mods

Share this post


Link to post
Share on other sites

Altitude- Zero

Main- 170

Needle /clip position - Jd red / 4th

Pilot- 42

Fuel screw (turns out)- 1.75

Leak jet- 65

carb mods- Ap mod

air box mods- cut top and door not right side

air filter -Honda

Pipe/ mods- Running 450R pipe

Engine Mods- None

Share this post


Link to post
Share on other sites

Altitude 1000-2400'

Main 168

Needle /clip position Red JD needle 5th clip

Pilot Stock

Fuel screw (turns out) ~1.75

Leak jet Stock

carb mods None

air box mods All openings open up

air filter Stock

Pipe/ mods Stock with baffle in (I took it out but cannot tell a difference in power with it in so I just leave it in)

Engine Mods Stock

Share this post


Link to post
Share on other sites

Lets compile a Jetting reference for our bike;

Altitude 2,000-3,000 ASL

Main 165

Needle /clip position 4th

Pilot Stock

Fuel screw (turns out) 2

Leak jet

carb mods

air box mods. Snorkel off and side vents cut open

air filter Uni Foam Filter

Pipe/ mods Stock/Baffle removed

Engine Mods

Share this post


Link to post
Share on other sites

Altitude 0-6000

Main 170

Needle /clip position middle(4th?)

Pilot Stock

Fuel screw (turns out) 1 1/4

Leak jet Stock

carb mods Magnetic drain bolt

air box mods Drilled 1/4" holes in side vents and pulled snorkle

air filter TwinAir filter and basket, no screen

Pipe/ mods Yoshi Carbon Fiber slip on

Engine Mods Stock but did remove smog, crankcase breather tube re-routed.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×