How to protect the front brake line

I am running an aftermarket headlight on my MX bike and the brake line will flop around with the mx numberplate in place which has a guide for the cable. I managed to get a zip tie around an opening in the headlight housing but am worried it may eventually wear into the brake line. Apart from layers of duct tape, what should I put over the brake line to prevent this from happening?

In this picture you can see the gap I am referring to as well as the cable. The zip tie isn't real tight and I think it will do the job well enough but I do want to protect the cable from wear.


throw the brake line behind the plate, thats what i did on my cr, all i had to do was cut out a small opening at the bottom of the numberplate so that the brake line could continue down to the brake.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now