Jump to content
Sign in to follow this  

WC Heavy Duty Skidplate

Recommended Posts

How do I install it without squeezing the coolant breather line?

I rode it for about 30min and had a lot of coolant overflow.

Share this post


Link to post
Share on other sites

The plate pinches the line but it shouldn't totally cut off circulation, so verify that first.

Are you sure that thats causing your problem???

Share this post


Link to post
Share on other sites

You need to lay the hoses side by side to prevent them from getting pinched. That's what I did on mine and I have run it for many hours in 90 degree heat with no problems.

Share this post


Link to post
Share on other sites

I put the two hoses side by side but this time outside the lower watter pump bolt (covered only by the engine guard of the skid plate) and it works OK; but I will have to change the hose to a longer one about 2 inches so they won't be to streched out.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×