Jump to content
Sign in to follow this  

nedd a couple 04 rmz specs quick!!!

Recommended Posts

im putting the head back together on my 04 rmz250 and i need a couple specs. head bolt torque, cam carrier/cap torque, and most importantly valve clearances. any info as soon as someone sees this would be greatly apreciated. i know i am an idiot for not having a manual...its not here yet.

Share this post


Link to post
Share on other sites

Head bolt torque = 49 Nm

Exhaust Clearance 0.17 - 0.22 mm or (0.0067 - 0.0087 in)

Intake Clearance 0.10 - 0.15 mm or (0.0039 - 0.0059 in)

Camshaft Cap Bolt torque = 9.8 Nm

Do not forget to check your timing chain tensioner for proper setting and function!!

Share this post


Link to post
Share on other sites

Cyclepop,

My Suzuki shop manual shows 9.8 N-m or 87 in lbs for the camshaft cap bolts, do you have a type-o, they are only 6mm bolts.

I noticed the Intake and exhaust clearances are flipped. The exhaust is the larger clearance spec due to the extra heat.

The Head torque in 50 N-M which is 36 ft lbs.

RE

Share this post


Link to post
Share on other sites

Your right, long day, fixed post :thumbsup: ---Thanks

I should have those heads back today. I have had no calls from the machinist, so maybe no news was good news???

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×