Jump to content
Sign in to follow this  

Burned-Help-Throttle cuts out

Recommended Posts

After 3x3 mod. 25, 150, 2nd clip, I have the throttle cutting out at approx. 1/2 to 3/4 throttle. I am in Indiana(close to sea level) and am running stock pipe with the billet tip. What do I need to do? Thnx-Scott

Share this post


Link to post
Share on other sites

I called dynojet tech. on the matter. After trying to explain why I put a 25 pilot jet in(he couldn't understand why) he wanted me to take the air filter off and try it, then tape up the airfilter to determine if I was too rich or lean. Should I do this, or do you have an idea. Thnx-Scott

The tech thought it sounded like a needle problem

Share this post


Link to post
Share on other sites

sounds like a similar problem on mine, i cured some of it with a bump up to a 152.5 mj. After some different symtoms of another sort i will go to clip position 3 (thanks for the suggestion eddie!)

Share this post


Link to post
Share on other sites

you can get at it but for me its not worth the trouble. I almost always just pull the carb

Share this post


Link to post
Share on other sites
Try a 147.5 main. Have you played with the fuel screw any?

I may be wrong, but doesn't the fuel screw adjust the carb just off of idle.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×