Jump to content
Sign in to follow this  

FRP Racing Kick Start Lever

Recommended Posts

Anyone ever buy the Fredette Racing Compact Kick Start Lever? I just got around to try installing it on my 2003 KDX 220, and it is not an easy swap in like I thought it would. The angle on the FRP lever is too "straight" and hits the frame, and will not swap out and install in the same base location as the stock lever. Do you have to change the location of the kickstart mount by pulling that 17mm bolt and adjusting the fit (angle ) of the FRP lever there? I don't have a manual, and didn't want to start pulling things off the motor. I need to be ready to ride this Saturday.

It looks like the FRP site has been hacked, and any forum info there is lost for now.

Any help out there would be much appreciated!

Eric Wager

Quality Analyst

Widmer Brothers Brewing

www.widmer.com

1999 XT225

2003 KDX220

2004 DRZ400S

Share this post


Link to post
Share on other sites

yes pull the nut and move the pawl 1 cog forward.be sure to loctite the nut or actually I think it is a nut back on or you WILL lose it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×