Jump to content
Sign in to follow this  

Stalling when braking?

Recommended Posts

Why would my bike be doing this? It does it every once in a while when stopping suddenly...

Idle too low? I finally installed my 25 pilot, got rid of an intermediate throttle bog I had, and now there's this. Did I mess up my float level?

Share this post


Link to post
Share on other sites

*subscribing*

Same issue here. I suspect 'burned' is right, it's a jetting issue. I have the DJ kit and a Yosh system. This phenomenon happens to me when I stop really hard on the front [brake], or do a stoppie.

Mine is surely not the kickstand kill (in this case anyway :thumbsup:).

Share this post


Link to post
Share on other sites

fuel level too high, float adjust, needle/seat not sealing properly

Share this post


Link to post
Share on other sites

i had the same problem with my of 250f and it turned out i was used to a looser footbrake than what came from the factory and i loosened it up and havent had a problem since

Share this post


Link to post
Share on other sites
i had the same problem with my of 250f and it turned out i was used to a looser footbrake than what came from the factory and i loosened it up and havent had a problem since

How does a tight footbrake cause stalling????

I'd have to go with burned on this one with the high float level but when my bike was stock it would regularily die when braking hard. Turns out it was just really poor jetting and too low an idle.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×