Jump to content
Sign in to follow this  

S with a Yosh, jetting Q

Recommended Posts

Well I was gonna wait for my FCR to put my full Yosh RS3 on, but since the FCR is backordered until who-knows-when, I installed the pipe.

Yosh instructions say to use a 145mj and turn the fuel screw out 1.5 turn more than stock.

I don't have the DJ kit, haven't touched the airbox yet. I probably won't bother with the DJ kit since I will be replacing the whole carb anyway.

I know the jetting wont be perfect with the stock needle, but it's only temporary so I can ride with the yosh until the FCR shows up.

do the yosh jetting instructions sound ok? What if I open the airbox to 3x3 and yank the encap from the pipe? would the 145 be too lean? sea level. Thanks

Share this post


Link to post
Share on other sites

Yes it would be to lean with the 3x3 mod. I am also waiting for the FCR so i did not do the DJ kit. I have full Yosh, 3x3 mod, Twin air filter.

Sea level

152.5 main jet

27.5 pilot jet

3 turns out on fuel mixture screw

:thumbsup::ride:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×