Jump to content
Sign in to follow this  

2002 400S model, needs jetting, yes, no?

Recommended Posts

Only mod done on bike is Billet Aluminum Exhaust Power Tip

Elevation: 466 ft

Plan to remove snorkel. Will stock jetting be fine?

Later if I do the 3x3 mod which kit do I need and setup?

I search but tend to come up with half dozen different setups for my bike

many thanks

Share this post


Link to post
Share on other sites

If the jetting is stock then it should be changed to match your elevation/temperature. 3x3 requires rejetting.

Share this post


Link to post
Share on other sites

i ran my new '05 s w/o the snorkle and with stock jetting @ around 800ft. alt. with no problems (like 5000 mi.). however, it will run MUCH better with the 3x3 AND correct jetting.

Share this post


Link to post
Share on other sites

I took the snorkel out on my 02 ran ok until it got hot. Stock pipe no 3x3 with

Exhaust Power Tip. After really warming up the bike would surge like crazy just off idle..was like riding bucking bull.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×