Jump to content
Sign in to follow this  

94 TE 610 Valve specs

Recommended Posts

Does anybody know what the valve adjustment specs and proceedures are for adjusting the valves on a 94 TE610? I was just advised that the shop manual is no longer available...

Thanks in advance.

Share this post


Link to post
Share on other sites

Hi Scott,

according to my '94 owners manual the vave clearances for both the 350 and 610 TE's are as follows :ride:

Inlet: 4 thousandths of an inch(0.004"), or 0.10mm if you prefer

Exhaust 6 thou. of an inch (0.006"), or 0.15mm,

I know that Dave Hopkins gave an excellent description on finding TDC, and checking valve clearances around 6 months ago, do a search to find that post,

Hope this helps, Charlie :thumbsup:

Share this post


Link to post
Share on other sites

Charlie,

Thank you very much for the information. I did a search and found Dave's write-up. Great stuff.

Thanks again.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×