Jump to content
Sign in to follow this  

yoshimura repack - please help!

Recommended Posts

I repacked my yoshimura trc tonight. First, these are kind of a pain. I pulled the end cap first and the core would not come out. you have to take it out from the front. I got it all out, and bought some fmf high performance packing. - The trc has a some steel mesh wrapped around the core and riveted to it. I left this around the core and wrapped the core with only one layer - is this going to be a problem. Should I have used the whole packing piece. Because of the odd triangle shape and the steel mesh around the pipe, and afraid of it getting too tight - I chose only one layer. Did I mess up? I guess since I know now how to pull it apart, it is not a big deal, but would just as soon leave it alone if one layer will be good enough. I did start it and it sounded pretty loud, but the yosh trc is obnoxiously loud as is. Any thoughts?

Share this post


Link to post
Share on other sites

If your pipe is louder than it was before, you didn't use enough packing.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×