Jump to content
Sign in to follow this  

Help i have a xr 200r with a cracked off mag bolt

Recommended Posts

i was in a rush trying to get a bike fixed for the weekend and put the mag bolt on with my air gun ..... and it cracked off in the crank .... i know i am a dumb a## how do you get it out ... i was thinkng that i would have to dril out the center and use a easy out .... ? has anyone done this ? its a 92 xr 200r :applause::applause::thumbsup::ride:

thanks Jon

Share this post


Link to post
Share on other sites

If the end isnt sticking out then drilling it out will probably be your only choice.

Get a left handed drill bit and you wont need an easy out.

As soon as it bites ....it'll back it out.

Share this post


Link to post
Share on other sites

If it broke off from overtightening, not crossthreaded or bottomed out in the hole it is probably pretty loose. As stated above, try to get a left hand drill. Even resharpen a right hand bit so it cuts backward. The flutes will be wrong for clearing the chips but you won't be going that deep.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×