Jump to content
Sign in to follow this  

WR250f wont start, help?

Recommended Posts

ok, so my friend left for a trip and he left his 03 (im pretty sure) WR250f at my house. now since he got it, it has had problems starting and has been in and out of the shop many, many times... can anyone give me some ideas as to what is wrong with it

thanks

Share this post


Link to post
Share on other sites

First, get a manual.

Remove the valve covers.

Refer to the manual for correct crankshaft position and clearance.

Check the clearance between the cam lobes and the tappets with a feeler guage, and compare the readings to the specs in the manual.

If adjustments are needed, you have to remove the cams and tappets to replace the shims.

You need to get a manual.

Did I say you need a manual?

Share this post


Link to post
Share on other sites
First, get a manual.

Remove the valve covers.

Refer to the manual for correct crankshaft position and clearance.

Check the clearance between the cam lobes and the tappets with a feeler guage, and compare the readings to the specs in the manual.

If adjustments are needed, you have to remove the cams and tappets to replace the shims.

You need to get a manual.

Did I say you need a manual?

MANUAL....NOOOOOOOOOOOOO i guess i dont get to ride it then :thumbsup:

Share this post


Link to post
Share on other sites

If the valves are beginning to move, you don't want to ride it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×