Jump to content
Sign in to follow this  

Lighting coil on 99 250sx?

Recommended Posts

Does anyone have advice for getting power for lights on a 99 250sx. I understand a 2k3 stator/ flywheel is best ktm stock parts. And a different backing plate (110mm) is needed and larger cover. I would like as much watts as possible ( within reasonable cost). I have seen Trail Tech also makes flywheels that increases output. Any advice or experience? :thumbsup:

Share this post


Link to post
Share on other sites

Never made the switch - seems too costly, and I limp along with a 2k3. You have a 2k2? Anyhow the 2k3 only provides 40 W AC for lighting. If you're going to spend to money try to get about 100 W preferably DC.

Here's one more resource for you

http://www.rickystator.com

Share this post


Link to post
Share on other sites

I thought I had a 2k1 on my 250sx? I thought a 2k2 was the 40 watt stator? And a 2k3 had 80-100 watts output?

Share this post


Link to post
Share on other sites
I thought I had a 2k1 on my 250sx? I thought a 2k2 was the 40 watt stator? And a 2k3 had 80-100 watts output?

I think you are right, and I have a 2k2 not 2k3. There are schematics under parts catalog in the enclosed link - just click to 1999.

I was confusing the EU version of the bikes with USA.

http://www.ktminfo.com/ktm.asp

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×