Free Turn Signal Upgrade

[dblj]

SomeBody Posted A Free Front Turn Signal Upgrade Not Long Ago On Here. I Thought I Would Show You How Its Done,the Only Thing You Need Is A 10mm Wrench,phillips Screwdriver And A Hacksaw.all You Do Is Unplug Blinkers Flip The Stock Blinkers And Brackets To The Opposite Side And Turn The Brackets The Opposite Way.so The Bracket Dishes In.the Only Modification Needed Is, The Now Clutch Side Bracket Needs To Be Trimmed A Little With A Hacksaw So It Will Sit Level.I COULD NOT FIGURE OUT HOW TO POST THE IMAGES ON THIS THREAD SO CHECK OUT MY GARAGE FOR PICS.this Only Takes About A Half Hour,and Best Of All Its Free.

[kman780]

Check this out....

https://www.thumpertalk.com/forum/showthread.php?t=403362&parentpage=2

[dblj]

Sorry If It Is A Repeat Guys, I Did Not Catch The Other Post.

[another drz guy]

thanks, the puzzle is comming together ?

[Mr Batman]

Here's my $12.95 turnsignal mod ... that's the cost of a pair of LP blinkers. Super-sano install on the end of my handguards. Worlds better than stock and took 15 minutes to do (only because I used heatshrink connectors and had to heat them).

http://filebox.vt.edu/users/jmasters/images/headlight.JPG