Jump to content
Sign in to follow this  

antifreeze help!!

Recommended Posts

1. open up the radiator cap

2. take out the bottom bolt on the water pump

3. drain coolant.

4. put bolt back in

5. mix up 1 part vinegar to 5 parts water (only need ~1 litre) and fill radiators, replace cap

6. start bike and run for a while.

7. repeat steps 1 - 4.

8. fill with coolant of your choice.

Share this post


Link to post
Share on other sites
1. open up the radiator cap

2. take out the bottom bolt on the water pump

3. drain coolant.

4. put bolt back in

5. mix up 1 part vinegar to 5 parts water (only need ~1 litre) and fill radiators, replace cap

6. start bike and run for a while.

7. repeat steps 1 - 4.

8. fill with coolant of your choice.

I only repeated steps 1-4 twice before completly flushing the system again w/ distilled water and then filling a 50/50 mix of prestone

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×