Jump to content
Sign in to follow this  

Ufo help

Recommended Posts

Ok so I got my uf o rear light todat and i have started installing it but i need some help. I have already searched all of over the site and found nothing. I need to know what to cut and what to drill and where to put wires. Well if anyone could help it would be greatly apreciated.

Share this post


Link to post
Share on other sites

Donut_01

Which DRZ are you trying to put the UFO light on?

Al E

Share this post


Link to post
Share on other sites

Here's how I did mine:

Cut the tabs off the stock rear fender.

Drilled two holes in the UFO and used the stock mounting screws through the top:

ufo1.jpg

Drilled 2 small holes in the tail light assembly for 2 tie straps:

ufo2.jpg

Probably not the cleanest or best, but it is very stable. Didn't trim anything other than the stock fender's tabs. Doing it this way, you don't have to have bolts exposed on top of your fender.

ufo3.jpg

WGW

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×